Skip to content

Why your Amazon ads aren't working: 12 causes and how to fix them

By Akshit Seth · Last updated 26 October 2026

· 8 min read

Illustration of an open planning notebook and translucent green and blue frames.

Why are my Amazon ads not working?

Most Amazon ads fail for one of four reasons: the ad isn't eligible to show, it shows but doesn't earn clicks, it gets clicks but the listing doesn't convert, or it sells at an ACoS above your margin. Find which symptom you have first, because each one needs a different fix.

Find your symptom first

"My Amazon ads aren't working" can mean four different problems, and each one has a different fix. Before you change any bids or budgets, find the row below that matches what you see in Campaign Manager over the last 14 to 30 days. If you'd rather have a specialist work through it for you, that's what our Amazon PPC management service does.

Comparison

No impressions, or very few

Likely causes
You've lost the featured offer, the product is out of stock or suppressed, bids are too low, or the budget runs out early
First fix
Check eligibility, then bids and budget (causes 1 to 4)

Impressions but few clicks

Likely causes
The main image, title, price or rating loses the shopper, or the ad shows in the wrong places
First fix
Compare your listing with the results around it (causes 5 and 6)

Clicks but no orders

Likely causes
The listing doesn't convert, or the ad matches searches that don't fit
First fix
Fix the listing and add negative keywords (causes 7 and 8)

Orders but no profit

Likely causes
ACoS is above your break-even ACoS
First fix
Work out break-even, then cut what loses money (causes 9 and 10)

ACoS suddenly went up

Likely causes
Sales not yet credited, a lost featured offer, a price change, one search eating the budget, or a sale season
First fix
Work through the checklist (causes 11 and 12)

Sales fall when you pause ads

Likely causes
Ads were bringing in sales the listing doesn't win on its own
First fix
Pause in steps and test one product first

No impressions

Illustration of a petrol-blue glass magnifying lens examining product blocks.

Sponsored Products ads only run for a product while your offer is the featured offer, often called the Buy Box. As Amalyze puts it, "If you lose the Buy Box, your ads stop serving for that ASIN" (Amalyze). If another seller undercuts you on a shared listing, your ads can stop without any warning in the campaign.

Fix: check the featured offer on your top products every day while you're investigating. Sort out price, stock or delivery speed before you touch bids.

2. The product is out of stock or the listing is suppressed

Out-of-stock products stop showing ads. Amalyze also notes that a suppressed listing, for example one with missing attributes, a main image that breaks the rules or a title over the limit, simply shows zero impressions in the campaign, with no clear message. Some categories have extra rules for advertising too.

Fix: look the product up in Manage All Inventory in Seller Central and check for an inactive or suppressed status. Restock before you raise budgets.

If your bid sits well below what others pay, Amazon rarely shows your ad. eVanik's 2026 data from its own sellers puts the median cost per click on Amazon India at ₹12 for Home & Kitchen, ₹16 for Apparel and ₹19 for Beauty & Personal Care (eVanik). A ₹3 bid in Beauty will collect very little.

Fix: compare your bids with the suggested bid range in the console and with your category's typical click cost. Raise bids on your most relevant keywords first, not across the board.

4. Your budget runs out early in the day

Amazon spends daily budgets "as quickly as possible", and once a budget runs out, "your ads won't be eligible to show until the next day, at midnight when the daily budget resets" (Amazon Ads). A campaign that runs out by noon misses every shopper after that.

Fix: check each campaign's budget status in Campaign Manager. Move budget from campaigns that don't spend theirs, or lower bids on searches that eat the budget without orders.

Impressions but few clicks

5. Your listing loses the click

Shoppers compare the main image, title, price, rating and delivery promise of every result on the page. If yours looks weaker than the products around it, they scroll past, however well the ad is placed.

Fix: search your main keyword on Amazon.in on your phone and look at your product next to the top five results. Fix the weakest of these first: main image, price, number of ratings, title.

6. Your ads show in the wrong places

Automatic and broad match campaigns can show your ad on loosely related searches and on other products' pages. Those impressions rarely turn into clicks.

Fix: open the search term report and sort by impressions. Searches with lots of impressions and almost no clicks are often a poor fit. Add the clearly wrong ones as negative keywords.

Clicks but no orders

Illustration of unbranded product packaging arranged on green and blue glass platforms.

7. The listing doesn't convert

If shoppers click but don't buy, the ad did its job and the listing didn't. Price, reviews, images, A+ content, size charts and delivery time all matter after the click.

Fix: check each product's conversion rate (orders ÷ clicks × 100). A product far below your others needs listing work before it gets more ad budget.

8. You're paying for searches that don't fit

Broad match and automatic campaigns find new searches, but they also buy irrelevant ones: a steel bottle ad shown for "plastic water bottle", or a kurta ad shown for "saree". Each click costs money and almost never sells.

Fix: go through the search term report every week. Add irrelevant searches as negative exact or negative phrase keywords straight away. Negate any other search once it has spent your target cost per order without an order.

Orders but no profit

9. Your ACoS is above your break-even ACoS

ACoS is ad spend ÷ ad sales × 100. Break-even ACoS is your profit before ads as a share of the price. A ₹1,000 product that leaves ₹400 after product cost, Amazon's fees and shipping breaks even at 40% ACoS. At 48%, every ad sale loses ₹80.

Fix: work out the break-even ACoS for each product with our ACoS calculator, then set a target a few points below it.

10. Every product shares one campaign and one bid

When products with different margins sit in one campaign, the low-margin ones lose money at a bid the high-margin ones can afford. The campaign can look fine on average while some products quietly lose money.

Fix: group products by margin or price band, give each group its own campaign and budget, and set bids from each group's target ACoS.

Why your ACoS suddenly went up

Illustration of a glass balance weighing green tokens against product cubes.

11. Recent sales haven't been credited yet

For sellers, Amazon credits a Sponsored Products sale to your ad if it happens within 7 days of the click, and within 14 days for Sponsored Brands and Sponsored Display (Intentwise). So the last few days always show all the spend but not all the sales, and ACoS looks worse than it will end up.

12. Something changed in the market or in your account

Competitors raise bids, sale seasons start, coupons end and stock runs low. Any of these can push ACoS up within a day.

When ACoS jumps, check these in order:

  1. Look at a date range that ended at least 7 days ago, so the sales have caught up.
  2. Check the featured offer and stock on your top five products.
  3. Check for price, coupon or deal changes, yours and your competitors'.
  4. Sort the search term report by spend for the last 14 days. One new search can take a big share of the budget.
  5. Check the campaign history for bid, budget or bidding strategy changes.
  6. Check the calendar. Sale events push up click costs for everyone.
  7. Compare with TACoS (ad spend ÷ total sales × 100). If total sales rose too, the higher ACoS may be paying for growth.

Sales drop when you pause ads

Pausing ads removes the sales they brought in, and those sales don't always come back through organic search. Amazon doesn't publish how its organic ranking works, so test it on your own products instead of guessing.

Fix: don't switch everything off at once. Pause ads on one steady product for two weeks and compare its total sales, not just its ad sales, with the two weeks before. Then decide product by product.

Why it's worse in October and November

Illustration of product parcels connected by a glass delivery network.

Festive sales bring more shoppers and more advertisers. eVanik's 2026 benchmarks show TACoS rising 28% to 45% during the October and November festival sales (eVanik). Ads that pay back in August can lose money during the Great Indian Festival if bids and budgets stay the same.

Fix: decide before the sale which products get extra budget (good margin, enough stock, strong reviews), cap bids on the rest, and check spend every day while the sale runs.

When to get help

Get help when you've worked through the causes above and still can't see where the money goes, when ACoS stays above break-even for a month, or when ads take more time than you have. Our free ads audit checks your campaigns against every cause in this guide and sends you a written plan. If you'd like us to run your ads, see our Amazon PPC management service.

Frequently asked questions about Why your Amazon ads aren't working: 12 causes and how to fix them

Why are my Amazon ads getting impressions but no sales?

Usually it's the listing, not the ad. The price, main image, reviews or delivery promise lose the shopper after the click, or the ad matches searches that don't fit the product. Check the search term report for irrelevant searches, then compare your offer with the products shown around yours.

Why did my ACoS suddenly go up?

Check the date range first. For sellers, Amazon credits a Sponsored Products sale to the ad for 7 days after the click, so the last few days always look worse than they'll end up. Then look for a lost featured offer, a stock-out, a price change, one new search eating the budget, or a sale season starting.

How long should a new campaign run before I change it?

About two weeks. Amazon suggests letting an automatic campaign run for about two weeks before building manual campaigns from it, and keywords need 10 to 20 clicks before their numbers mean much. Changing bids every day on three or four clicks mostly reacts to noise.

Get a free ads audit

We'll check your account for the problems in this guide and send you a written plan.

+91
Which marketplaces do you sell on?

Pick all that apply

* required

We'll contact you on WhatsApp, phone or email about your audit. See our Privacy Policy.

WhatsApp Call Free audit